Thinking about window designs for a new home can be difficult; especially when you need to match it with the general look of the house as well as make sure that your windows will keep the bad weather from invading your home. One type of window design that is really popular is double hung windows. This can be designed for a single home, or for an entire apartment block, and, if you own the building where double hung windows are installed, you will also need to think about where to acquire double hung replacement windows in case something should happen to the original ones.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Ads

A double hung replacement window can be bought from any of your local window manufacturer in your locality. Double hung windows are among the most common type of windows in the country, and its popularity is due to the following facts:

•    These windows can be really versatile. The windows have separate upper and lower sashes that can be individually adjusted to obtain maximum ventilation.

•    The type of ventilation that double hung windows can give you also makes it more efficient in assisting you with your cost-cutting initiatives at home.

A double hung replacement window can be installed to replace any other kind of window that has previously been installed in the frame. All you need to do is following the instructions below:

1.    Just like in any other task, it is important that you get all the accurate measurements of your window frame from one jamb to another and from one side to the next. The 3 most important places where you will have to take measurements are the top, middle, and bottom.

2.    Once the all measurements are listed down, it is time to pry off the sash and unscrew the stops.

3.    Also remove jamb liners using a pry bar.

4.    Prepare the frame by sanding and painting it.

5.    Install new insulation by first removing any remaining fiberglass from weight pockets.

6.    Drill in holes on the frame.

7.    Apply spray foam and leave it to dry for at least 6 hours.

8.    Follow up with caulk.

9.    Install the 3-inch screws that would keep your double hung replacement window in place. Test it first to verify if it fits the frame perfectly before you apply the final touches.

10.    Once you are sure that the fit is already snug enough, do the finishing touches by closing any gaps in the frame with caulk, primer, and paint where needed.

To assist you in fast and easy installation of replacement windows, it would be better if you buy replacements that are already fully assembled and ready for installation. There would also be a manual or guide from your window manufacturer that you can refer to in case you need further information on measurements, the tools you need to have for the installation, as well as the right kind of double hung replacement window that you will need to buy.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -