A window sash is probably the most important element that holds your beautiful window panes in place. So if the window sash gets old and drafty, you might be plagued with the question of how to replace window sash? There are many tips that you can find on the internet, and you may even be able to pry one out from your window sash provider. However, to save you all the trouble of having to find someone or something that can provide detailed, simple, and easy-to-follow steps on how to replace window sash, here are some tips:

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Ads

1.    You will need to get the window’s measurements on all side of the jamb, as well as get the window frame’s height.

2.    Use an angle finder to ensure that the bottom sash’s bottom edge is at a 14-degree angle from the sill’s bevel.

3.    Pry the inside stops off by first using a putty knife to separate it from the lower sash and then finish off with a pry bar.

4.    Cut the cord and unscrew the pulleys from each side of the sash so you can lift it up going outward.

5.    You can remove the top sash by cutting the cord that keeps it in place after the parting stop has been separated from the jamb.

6.    Refer to your manufacturer’s specifications on the correct measurements for installing the liner bracket clips.

7.    Replace the head parting stop by pressing on it to put into place. Make sure that the weather-stripping is facing outward, and then fasten the stop into place with nails.

8.    The top sash is now ready to be installed. Install the sash cam pivots according to the way you prefer the sash to tilt – in or out.

9.    Once the top sash is in place, you can now install the bottom sash and then restore the molding.

And, that’s it! Easy, isn’t it?

Total work time will take more or less 3 hours, so you can choose to do replaced your window sash after work on weekdays or on weekends. You wouldn’t have to worry about it taking a big chunk out of family time. This is provided that you are well-skilled in obtaining the correct measurements of things, because a single mistake in the measurements may cause you more than time and effort. That a mistake may also mean that you will have to throw replacement sash and buy a new replacement sash, thereby costing you twice the amount of the sash. You will also have to ensure that you have all the necessary tools for doing the task, such as:

•    Hammer

•    Tin snips for cutting the cords off

•    Framing square

•    Pry bar, and make sure that it is flat

•    Chisel or putty knife

•    Screwdriver

•    Tape measure

•    Drill

•    Angle finder

One way to avoid mistakes in measurements, just refer to the manufacturer’s instructions on the right height, width, etc., of the sash and other components. But, when you’re in doubt about the accuracy of your measurements, just call a professional to do the job for you.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -